1/8" Shank 1.5mm x 12mm Carbide 1-Flute Left Hand End Mill CNC Router Bit 2pcs

Description

Document
Specifications:Shank Diameter: 3.175mm / 1/8"Cutting Diameter: 1.5mm / 0.06"Cutting Edge Length: 12mm / 0.47"Overall Length: 38mm / 1.5"Material: Carbide (Tungsten Steel)Number of Flutes: Single FluteStyle: Left HandHardness: 45-48HRCPackage Content: 2pcs x End Mill Router BitDescriptions:Suitable for engraving, cutting, carving, milling, slotting, sculpturing in MDF, ABS, PVC, PP, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.Made of carbide (tungsten steel), the end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, ensures high work efficiency.Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Upcut end mills can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life.Used on engraving machine, CNC machines, and machining center. Adopts spray and air jet cooling to improve the use effect of the milling cutter. The end mill is easily twisted off when using on hand drill.Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
6mm Dia 6mm Shank 75mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD
12.76
8mm Dia 8mm Shank 100mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD
18.02
1/8" Shank 1.5mm x 12mm Carbide 1-Flute Left Hand End Mill CNC Router Bit 2pcs
Specifications:
Shank Diameter: 3.175mm / 1/8"
Cutting Diameter: 1.5mm / 0.06"
Cutting Edge Length: 12mm / 0.47"
Overall Length: 38mm / 1.5"
Material: Carbide (Tungsten Steel)
Number of Flutes: Single Flute
Style: Left Hand
Hardness: 45-48HRC
Package Content: 2pcs x End Mill Router Bit
Descriptions:
Suitable for engraving, cutting, carving, milling, slotting, sculpturing in MDF, ABS, PVC, PP, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.
Made of carbide (tungsten steel), the end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, ensures high work efficiency.
Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Upcut end mills can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life.
Used on engraving machine, CNC machines, and machining center. Adopts spray and air jet cooling to improve the use effect of the milling cutter. The end mill is easily twisted off when using on hand drill.
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
Hot Item
8mm Dia 8mm Shank 100mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD 18.02
6mm Dia 6mm Shank 75mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD 12.76
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
1/8" Shank 1.5mm x 12mm Carbide 1-Flute Left Hand End Mill CNC Router Bit 2pcs
Specifications:
Shank Diameter: 3.175mm / 1/8"
Cutting Diameter: 1.5mm / 0.06"
Cutting Edge Length: 12mm / 0.47"
Overall Length: 38mm / 1.5"
Material: Carbide (Tungsten Steel)
Number of Flutes: Single Flute
Style: Left Hand
Hardness: 45-48HRC
Package Content: 2pcs x End Mill Router Bit
Descriptions:
Suitable for engraving, cutting, carving, milling, slotting, sculpturing in MDF, ABS, PVC, PP, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.
Made of carbide (tungsten steel), the end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, ensures high work efficiency.
Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Upcut end mills can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life.
Used on engraving machine, CNC machines, and machining center. Adopts spray and air jet cooling to improve the use effect of the milling cutter. The end mill is easily twisted off when using on hand drill.
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
6mm Dia 6mm Shank 75mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD
12.76
8mm Dia 8mm Shank 100mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD
18.02
Hot Item
8mm Dia 8mm Shank 100mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD 18.02
6mm Dia 6mm Shank 75mm Long HRC45 Carbide AlTiN Coated 4 Flute Square End Mill
USD 12.76
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Mar-27-22 at 12:37:11 PDT, seller added the following information: